QUALITY SERVICE
AT REASONABLE PRICES
Furnace and Air Conditioner Repair
When your heating or cooling system isn't working right, you want a straight answer, not a sales pitch.
Our certified technicians diagnose the actual problem first, using the latest diagnostic technology to find out exactly what's going on, then walk you through your options honestly so you can make the right call for your home and your budget. We carry parts for all major brands, so most repairs can be handled quickly without a long wait for ordering. And because a repair is only as good as the person doing it, we bring the same "best practice" attention to every repair call that we do on a full system install, checking the surrounding system, not just swapping the broken part, so the fix actually holds.
Our certified technicians service all major brands of heating and cooling equipment, including Lennox®, Trane®, Carrier®, Goodman®, Rheem®, and York®. In addition to repairs, we offer furnace and AC tune-ups, maintenance, and new equipment installations, so your system stays reliable no matter what brand is currently in your home.
Why Proper Installation and Maintenance Matter
A furnace or air conditioner isn't a standalone appliance. It's part of a larger system, and how well that system is installed, vented, and maintained determines how well it runs and how long it lasts.
That's why every install and service call follows our "best practice" procedures: checking refrigerant charge, copper line sizing, venting, and ductwork rather than just swapping equipment and hoping it works. Skipping these steps can raise utility bills, shorten the life of the system, and in some cases create real safety risks. Done right, regular maintenance and a proper installation keep your system meeting or exceeding industry standards for years to come.
BENEFITS:
-
Lower Utility Bills
-
Healthy Indoor Air Quality
-
Extended System Lifespan
-
Increased Energy Efficiency
-
Fewer Emergency Repairs
-
Safer, Properly Vented Operation
Have a specific question about your equipment not working?
See our FAQ page for more info.
Furnace blowing cold air? Gas furnaces are notorious for blowing cool air, but in many cases, that's ok. Are your rooms cold, is the heat setting on the thermostat being met? Modern, high efficiency furnaces heat differently than the old heating oil variety. If your rooms are at the temperature that you set on the thermostat, there's nothing wrong. If you set the thermostat for 70 degrees and your room is not reaching 70 degrees, then there may be a problem. If you set to 70 and the room is 70 degrees, but the furnace is blowing cool air, you probably have a hight efficiency furnace, and that's normal. Call us today at 651-398-1100 for more assistance or to schedule a service call.
Pilot Light Not Staying Lit? If the pilot light will not stay lit, that is when you have stopped pushing down on the pilot light button, and then the pilot light goes out, then the issue is a faulty thermocouple. It will need to be replaced and is a more complicated procedure with special tools involved. We strongly suggest you hire a furnace technician for this work. Now if the pilot light will not start at all, even when the pilot light button is being held down, then there is likely a problem with the gas getting to the furnace. It could be as simple as a bubble of air in the line. If this is the case and you hold down the pilot light long enough it should bleed the air bubble out. The challenge is that it’s hard to know if the issue is an air bubble. The problem could also be a damaged supply line and you will definitely want to work with a professional for this problem. Call us today at 651-398-1100 for more assistance or to schedule a service call.
A/C Not Cooling House? There are many reasons a central air could loose capacity. First would be a dirty condensor. (the unit outside) Yard debris ectra...can clog the fins of the condensor and make it have to work a lot harder. Second, the unit could be low on refrigerant. If that is the case the suction line (the big insulated copper line) will start to freeze up outside by the unit (if ran long enough). This too would require a service tech. Third, check your furnace filters. This is something that should be replaced monthly. Fourth, make sure ALL vents in the house are open. Even if you have a bedroom that no one uses. The heating/cooling system is designed to cool the whole house. Make sure furniture and rugs are not blocking any of the vents. Fifth, it could be that the compressor is becoming weak. When this happens, high pressure will leak into the low pressure side of the air conditioner, causing the temperatures to rise. This will require a new compressor or new condensing unit. Basically, if it is more than dirty air filters, your best bet would be to have us out to look your system over. Call us today at 651-398-1100 for more assistance or to schedule a service call.
Can I buy freon and install it myself? No. It takes special equipment used under pressure to install. It also requires knowledge of HVAC to do as well as an E.P.A. License to buy and use freon. We can not and will not sell to the public. Call us today at 651-398-1100 for more assistance or to schedule a service call.
DID YOU KNOW?
Most cooling system failures are caused by low freon charges, plugged filters, and forgetting to replace the batteries in your thermostat. (Routine maintenance can avoid all of these.)
